Ryobi Outdoor - RGT2500

Below are all the different types of Ryobi Outdoor. Select the device of your choice, to download the manual

Contents

Install the spring over the spindle Insert each end of the cutting line through the eyelets in the cutting head assembly and lower the spool while feeding the line as illustrated in Fig 16 Once the spool is in place apply pressure on the spool compressing the spring Pull each end of the line sharply to unlock the line from the slots Continue to apply pressure to the spool until the knob can be threaded clockwise onto the spindle Tighten the knob securely Fig 17 CLEANING amp STORAGE A WARNING Always turn off your trimmer before you clean or perform maintenance on it Failure to do so could result in serious personal injury Use a small brush to clean off the outside of the trimmer Do not use strong detergents on plastic housing or han ...